home>Products>2. UTP Extender>【HDEX40】HDMI Extender[1080P 40M]
【HDEX40】HDMI Extender[1080P 40M]

HDMI Extender Uncompressed 1080P 60Hz (24bit color), IR Remote Control Over single CAT5e / CAT6 / RJ45 Ethernet Cable, HDCP Compliance & EDID, Surge/Lightning and ESD protection, Mounting Ear, HDMI Repeater, 130ft/40M Full HD HDMI Balun

Recommended
  • 【4KEX70-ARC-H2】Uncompressed HDMI2.0 ARC Extender[4K 40M/1080P 70M]
  • 【4KSP12-S】HDMI2.0b Scaler Splitter [1 Input / 2 Outputs]
  • 【4KSW41-H2】HDMI2.0 Switch [4 Inputs / 1 Output]
  • 【4KEX70-L】Uncompressed HDMI1.4 Extender[4K 40M/1080P 70M]
product descriptionFEATURESsupport
Overview
HDEX40 is a 130ft(40m) Ultra-slim HDMI extender which offers the extension of full HD video, audio and one-way IR control up to 130ft(40m) along a single Cat5e/6a cable.With a feature set including transmission of uncompressed HD video 1080P@60Hz with 24bit color, 2ch audio and one-way IR control, it offers the added benefit of an incredibly low-profile and ease of installation.

The receiver offers manual EQ settings to fine-tune transmissions by distance for optimal signal delivery to the display.Threaded bushings on the 12V DC power connections allow use of both standard and locking DC power plugs. LED indicators for power supply to units and signal status to show established connection between connected devices.


Application

Our products can be used in various situations,such as home theater system,cabling of HDMI A/V project,education,school and corporate training environments, etc.
 






  • Simple and cost-effective HDMI Extender
  • Transmits 1080P/60Hz 2ch up to 130ft(40m) over Cat5e/Cat6a
  • HDMI 1.3b and HDCP compliance
  • Independent HDMI equalization button to adjust high quality picture
  • One-way IR pass through
  • Built-in ESD: ±8kV (air-gap discharge) & ±4kV (contact discharge)
  • Built-in Surge protection: Voltage ± 1kV
  • Compact size for easy installation

Troubleshooting


1.POWER:Make sure all devices are powered on. (Source, extender,display devices)
2.INDICATOR: Make sure LED indicators of transmitter and receiverare normal according to user manual.
3.DEVICES: Make sure picture can be shown normally when connecting source todisplay devices directly.
4.CABLE: Try to plug in and out HDMI/ CatX cable or replacewith other short qualified ones.
4-1 Qualified Cat5e/6/6a/7 cable is recommended,do not use Cat5 cable.
4-2 Make sure CATx cables is less than 164ft(50m) for HDMI signal transmission.
4-3 Make sure the two crystal connectors of CATxcable are compliant with standard (EIA/TIA 568B).

4-4Every time connected CatX cable to extender, please press EQ button foradjust/reset high quality images.
5.COMPATIBILITY: Please test other source and display devices todetermine whether it is a compatibility issue.

HDEX40 User Manual.pdf


North America: services@avaccess.com
Europe: service@avaccess.com
Australia: service-au@avaccess.com
US Tel: 626-840-8817
Copyright © AV Access. All Rights Reserved.
Follow us