home>Products>1. HDBaseT Extender>【4KEX70-VH】Uncompressed HDMI1.4 & VGA Extender[4K 40M/1080P 70M]
【4KEX70-VH】Uncompressed HDMI1.4 & VGA Extender[4K 40M/1080P 70M]

VGA HDMI Extender (HDBaseT) with auto-switch, PoE, 4K60Hz over Single CAT5e / CAT6 / CAT7, 70M(230ft)1080P, 40M(130ft)4K, Bi-directional IR+RS232, Auto EDID, LPCM7.1, Dolby TrueHD, DTS-HD Master Audio,Dolby Atmos, DTS:X

Recommended
  • 【4KEX70-ARC-H2】Uncompressed HDMI2.0 ARC Extender[4K 40M/1080P 70M]
  • 【4KSP12-S】HDMI2.0b Scaler Splitter [1 Input / 2 Outputs]
  • 【4KSW41-H2】HDMI2.0 Switch [4 Inputs / 1 Output]
  • 【4KEX70-L】Uncompressed HDMI1.4 Extender[4K 40M/1080P 70M]
product descriptionFEATURESsupport
4KEX70-VH HDMI extender is a slim transmitter receiver pair which is designed to extend HDMI 1080P@60Hz signals up to 70 meters and 4K@60Hz signals up to 40m via a single Cat 6a/7 cable. The transmitter can supply the power for the receiver. You can control the source from the display's location or control the display from source's location via IR pass-through function.

VGA and HDMI inputs are automatically selected and switched when the unit detects a signal, with a smart detection feature prioritizing HDMI over VGA if two devices are transmitting at the same time.

Including serial control support compatible with leading control systems, it offers an excellent solution to any commercial or residential environment where switching between VGA with audio and HDMI over distance is required.

√ Via Cat 6a/7 cables, 4Kx2K@60Hz (4:2:0) output up to 40m, 1080P@60Hz up to 70m
√ Via Cat 5e cable, 4Kx2K@60Hz (4:2:0) output up to 35m, 1080P@60Hz up to 60m
√ Transfers bi-directional infrared control signal together with the HDMI signal
√ Transmitter supplies the power for receiver
√ Auto-switch between VGA and HDMI inputs, HDMI IN has higher priority over VGA IN if both are connected
√ HDMI 1.4 with 4K and HDCP 2.2 compliant
√ Supports Bi-directional RS232 pass through

Trouble shooting


Power: Please make sure all devices are powered on. (source, extender, display devices)
Indicator: Please make sure LED indicators of transmitter and receiver are normal according to user manual.
Devices: Please make sure picture can be shown normally when connecting source to display devices directly.
Cable: Plug in and out HDMI/CatX cable or try another HDMI/CatX cable. Cat 5e/6/6a/7 cable is recommended, do not use Cat 5 cable.
Please make sure CatX cable is less than 230ft for 1080P, 130ft for 4K resolution.
Please make sure the two connectors of one CatX cable are same standard (EIA/TIA 568B).
Compatibility: Please test other source and display devices to determine whether it is a compatibility issue.

User manual-4KEX70-VH.pdf


North America: services@avaccess.com
Europe: service@avaccess.com
Australia: service-au@avaccess.com
US Tel: 626-840-8817
Copyright © AV Access. All Rights Reserved.
Follow us