home>Products>2. USB/KVM Extender>【4KEX100-KVM】KVM HDMI1.4 Extender [4K 100M/1080P 100M]
【4KEX100-KVM】KVM HDMI1.4 Extender [4K 100M/1080P 100M]

HDMI USB KVM Extender ( HDBaseT ) PoE, Uncompressed 4K60Hz & 1080P over single CAT5e / CAT6, 100M(330ft) with Zero Latency, High-speed 4 ports USB 2.0 Hub, 3 EDID modes with DIP switch, Bi-directional 3.5mm audio, RS232, Dolby Atmos & DTS:X, CE / FCC

Recommended
  • 【4KEX70-ARC-H2】Uncompressed HDMI2.0 ARC Extender[4K 40M/1080P 70M]
  • 【4KSP12-S】HDMI2.0b Scaler Splitter [1 Input / 2 Outputs]
  • 【4KSW41-H2】HDMI2.0 Switch [4 Inputs / 1 Output]
  • 【4KEX70-L】Uncompressed HDMI1.4 Extender[4K 40M/1080P 70M]
product descriptionFEATURESsupport

4KEX100-KVM is a 100m 4K HDBaseT 2.0 Extender which offers the distribution of uncompressed 4K@60Hz UHD video, Analog Stereo, power, RS232 and USB 2.0 up to 100m/330ft over a single Cat6 or above cable.

With USB 2.0 pass-through and USB Host connector in TX, and USB Device connectors in RX, it provides remote source PC control with keyboard and mouse, interactive display operation, data transmission and USB streaming over distances up to 100m. Additional features include Bi-directional 3.5mm stereo pass through.

With 48V PoH integrated inside, the extender needs only one power supply connected to TX to power both units. Its 12V power supply is secured with a screw-on connector to prevent the power from being accidentally disconnected. It has LED indicators for visual power supply to units and signal status to show established connection between connected devices.


EDID Management



DIP Switch

Position 1

Position 2

Position 3

EDID Copy (Default)

DOWN

DOWN

RESERVED

3840 x 2160P@30Hz 2CH

DOWN

UP

1920 x 1080P@60Hz 2CH

UP

DOWN

1920 x 1200@60Hz 2CH

UP

UP

Note: If EDID copyfailed, it will use 1080p/2ch as EDID for input.






√ Via Cat 6/6a/7 cables, 4Kx2K@60Hz output up to 100m, 1080P@60Hz up to 100m
√ Via Cat 5e cable, 4Kx2K@60Hz output up to 90m, 1080P@60Hz up to 100m
√ HDMI 1.4 with 4k@60Hz (chroma sub-sampling 4:2:0 8-bit only) and HDBT 2.0 compliance
√ One way POH, TX (PSE) with PSU to power both TX and RX (PD)
√ USB 2.0 pass through, USB-Host connector built in TX and 4 x USB-Device connector built in RX
√ High-speed USB 2.0, up to 480Mbps, pass through over HDBaseT up to 100m
√ Bi-directional Analog Stereo, and RS232 pass-through over HDBaseT
√ Independent DIP switch for EDID management
Does not support HDCP
Package Contents:
1 x Transmitter 4KEX100-KVM
1 x Receiver 4KEX100-KVM
1x 12 VDC 2A Power Supply
2 x Phoenix Male Connector (3.5 mm, 3 pins)
2 x Mounting Brackets (Pair)
1 x User Manual 

User manual-4KEX100-KVM.pdf


North America: services@avaccess.com
Europe: service@avaccess.com
Australia: service-au@avaccess.com
US Tel: 626-840-8817
Copyright © AV Access. All Rights Reserved.
Follow us