home>Products>3. USB/KVM Extender>【4KEX100-KVM-H2】Dual KVM HDMI2.0 Extender with Ethernet Port [4K 100M/1080P 100M]
【4KEX100-KVM-H2】Dual KVM HDMI2.0 Extender with Ethernet Port [4K 100M/1080P 100M]
AV Access HDMI 2.0 KVM Extender(HDBaseT) PoH 4K60Hz 4:4:4 18Gbps 1080P HDR 330ft(100m) over Cat5e/6/6a/7, Switchable 1 Host & 4 USB2.0 on TX or RX, Two-way IR/ 3.5mm Stereo/ RS232, Ethernet Extension

Recommended
  • 【4KEX100-KVM-H2】Dual KVM HDMI2.0 Extender with Ethernet Port [4K 100M/1080P 100M]
  • 【HDIP100D】HDMI IP Decoder[1080P 120M]
  • 【HDIP100E】HDMI IP Encoder[1080P 120M]
  • 【4KEX70-ARC-H2】HDMI2.0 ARC Extender[4K 40M/1080P 70M]
product descriptionFEATURESsupport
Overview

4KEX100-KVM-H2 is a 100m/330ft 4K@60 444 HDR HDBaseT Extender. The kit is HDCP 2.2 compliant and supports 4K/UHD video @ 60 Hz with 4:4:4 chroma sampling, as well as HDMI data rates up to 18 Gbps. It provides HDMI transmission up to 330 feet (100 meters) over category cable. It supports bi-directional Ethernet pass-through, RS-232, bi-directional IR control and bi-direction analog audio. Built-in one-way PoH, the receiver can be powered by the transmitter. The extender features visually lossless VESA Display Stream Compression (DSC) to enable HDR and 4K/60 4:4:4 video signal extension over HDBaseT. It also supports one USB host and 4 USB device ports switchable for KVM usage.









  • 【Switchable Remote KVM Control either on Transmitter or Receiver】 1 x USB-Host and 4 x USB 2.0 ports simultaneously in TX and RX for KVM usage. There is USB Switch on TX and RX, let you choose which end is USB device and which end is USB host as you wish. High-speed USB2.0 up to 480Mbps with ZERO delay. It provides remote source PC control with keyboard and mouse, data transmission.
  • 【HDBaseT HDMI2.0 with HDCP2.2 CEC】Visual lossless DSC solution. 4K@60Hz (4:4:4) HDR10 18G and 1080P@60Hz up to 100m(330ft) via Cat6/6a/7 cables, 4K@60Hz 90m(295ft) and 1080P@60Hz up to 100m(330ft) via Cat5e. HDR Format supported: HDR10 and Dolby Vision (with resolutions under 4K@30Hz).Auto EDID management.
  • 【Standard PoH and Two-way Ethernet Pass-through】One power adapter on the transmitter can power both units, and by inserting the power supply into the back of the kits and turning the metal nut clockwise to avoid accidental disconnection. Ethernet port on TX and RX for Internet extension over HDBT.
  • 【Bi-Directional IR Control + 3.5mm Stereo audio + RS232】 Allows user to bi-directional control of input and output devices from either location. RS232 provides a chance to pass through protocol commands to control third party devices.
  • 【Durability】Built-in surge/Lightning protection -Superior ESD protection: +/- 8KV(Air-gap discharge) +/- 4KV(contact discharge). 1-year warranty and lifetime technical support (AV Access).
Package Contents
Before you start the installation of the product, please check the package contents:
  • Transmitter x 1
  • Receiver x1
  • Power Adapter (DC 12V 3A) x 1
  • AC Power Cord with US Pins x 1
  • IR Emitter x1
  • Broadband IR Receiver (30 KHz ~ 50 KHz) x 1
  • Phoenix Male Connectors (3.5mm, 3 Pins) x 2
  • USB 2.0 Type-B to Type-A Cable (L=1.5m) x 1 
  • Mounting Brackets (with Screws) x 4
  • User Manual x 1

North America: services@avaccess.com
Europe: service@avaccess.com
Australia: service-au@avaccess.com
US Tel: 626-840-8817
Copyright © AV Access. All Rights Reserved.
Follow us